Forums > Kitesurfing General

Upgrading switch blade

Reply
Created by Franny18 > 9 months ago, 10 Nov 2019
Franny18
QLD, 11 posts
10 Nov 2019 9:08PM
Thumbs Up

I am looking to upgrade my 2013 Cabrinha switchblade (12m) to a 2019 switchblade.
my 2013 bar is still in good condition. Can I use the same bar with the 2019 kite??

lotofwind
NSW, 6450 posts
10 Nov 2019 10:27PM
Thumbs Up

Since 2013 there has been a lot of deforestation, global warming and bush fires that has meant a LOT less trees. So in 2019 you should be right to use a 2019 bar.
Hope this helps.

2stubborn2quit
WA, 169 posts
10 Nov 2019 8:35PM
Thumbs Up

Seriously a 2013 bar....put it in a museum.
Upgrade!

CJ2478
NSW, 482 posts
11 Nov 2019 7:27AM
Thumbs Up

Select to expand quote
Franny18 said..
I am looking to upgrade my 2013 Cabrinha switchblade (12m) to a 2019 switchblade.
my 2013 bar is still in good condition. Can I use the same bar with the 2019 kite??


Nothing wrong with with the old 2013 cab IDS bar. Some may be turned off by the lack of a single line flagging setup (not a big deal imo) or how annoying the QR was to reset.

Although the kite can fly cabrinha say the new bars (ie 1X system bars 2014 and newer although 2014 had the same sh!tty QR) are backwards compatible and but older bars (2009? - 2013) are not forward compatible.

Bottom line - although the 2013 bar will work (not optimal), recommended that you treat yourself to an upgrade.

Kamikuza
QLD, 6493 posts
11 Nov 2019 9:08AM
Thumbs Up

2020 bar has options for the QR attachment.
Overdrive is much lighter (if you have it) in later bars.
And ... how old are your lines?

KPSS Used
NSW, 372 posts
Site Sponsor
11 Nov 2019 12:03PM
Thumbs Up

2013 bars don't flag out to a single front line and the 2019 kites have a different bridle system so it wont depower the same when flagged to two front lines... not safe.

BrisKites
QLD, 1286 posts
11 Nov 2019 12:26PM
Thumbs Up

That bar wasn't safe in 2013.Even less safe on a newer kite.

azza2u
QLD, 91 posts
11 Nov 2019 2:12PM
Thumbs Up

Yes it will work, but really isn't the safest. I updated my 2010 12m to a 2019 and used the old bar for a few sessions until my new bar arrived. Kite flew ok but tested pulling the safety and it still held a bit of power flagged out on the 2 front lines due to the changed/shorter bridle on the 2019 kite.

Franny18
QLD, 11 posts
12 Nov 2019 7:22AM
Thumbs Up

Thanks for the responses all. Looks like I will treat myself to an upgrade.

jango
2 posts
12 Nov 2019 8:41AM
Thumbs Up

Should check out the drifters too. I was a bit hesitant getting one since I've mostly had switchblades. Less pumping up too. Only 3 struts. Picked up a 2nd hand 1x recoil bar for cheap. Much better with the single flagging line

TAA
SA, 1111 posts
12 Nov 2019 5:35PM
Thumbs Up

Definitely updated your bar.
Christmas is coming

timmybuddhadude
WA, 738 posts
13 Nov 2019 4:01PM
Thumbs Up

Probably wrong section..but it said switchblade
i have a for donation super crispy 2010 8m switch with ids for free for someone who loves switchblades..had a few myself.this ones like its been in the cupboard for 7years...but..bladder valves been reglued maybe someone has the same one with a decent LE



Subscribe
Reply

Forums > Kitesurfing General


"Upgrading switch blade" started by Franny18